Grundig GD-CI-AC2615M, User Manual, Page: 22 / 24

Server address: used to set the IP address of alarm server. If alarm occurs, it will inform the alarm
server.
Alarm out Relay
Users can set the relevant alarm response ways for I/O alarm in, motion detection, Occlusion
detect, Regular alarm, Net lost etc., After setting completed, click “Save” button to take effect.
Note: when “FTP” or “Mail” is selected, you need to set FTP or SMTP parameters in Network
Settings, refer to Section 4.3.2 or Section 4.3.3 for details.
Alarm Schedule
IP camera can set the effective alarm schedule. Select the alarm period (if Sunday is selected, alarm
will be enabled during the set period of each Sunday; if every day is selected, alarm will be enabled
during the set period of everyday), and then, set the time period. Enter the start time and end time
in the 24-hour format. The end time must be larger than the start time.
3.6 Record Management
IP cameras support storage with SD card. In the Record Management interface, you can set the
recording parameters.
3.7 User Management
The default super user is admin (password: admin). Super user can add, delete common user, and
change the password of common users.
To change the password of administrator, we need your e-mail address for the purposes of sending
a security code.
Figure 3-24 user management
Add Users
Click “Add a User”, enter the interface of “Add a User”.