Step 3:
Loosen the two security screws indicated in the figure with the
supplied security torx and open the dome cover.
NOTE: The dome cover is attached to the camera housing with an anti-drop cable. Users can choose whether to
separate the cover from the housing. In later installation steps, the dome cover is detached from the housing. If
you would like to detach the cover, please see Chapter 4.6. "Detach / Attach the Dome Cover".
Step 4:
Choose a suitable conduit entry on the camera for cable
connection (Side Conduit Entry or Back Conduit Entry). If you
are using the back conduit entry for cable connection, please
use a coin to open the conduit entry block (shown in the figure)
and put the block on the side conduit entry.
Step 5:
Thread the cables through the chosen conduit entry and connect them to the camera. For alarm I/O and audio I/O
connections, please refer to Chapter 4.1.
Step 6:
Fasten the gland body to the side conduit entry / back conduit
entry. Then tighten the thread-lock sealing nut to the gland
body.
9
English
Summary of Contents for GCI-F1576V
Page 2: ......
