WDR:
The WDR (Wide Dynamic Range) function
works to correct excessive light within the
frame to produce a usable image. When the
image has simultaneous bright and dark
areas, it makes both areas distinct. If you
select WDR, a submenu appears where you
can make finer adjustments.
- WEIGHT [MIDDLE, HIGH, LOW]: Select
the WDR level of the camera.
NOTE: If the WDR function is activated, the CVBS output will be deactivated.
6.4. Day&Night
Here you can choose different settings to control the DAY&NIGHT function.
COLOUR: The camera is always in colour mode regardless of the ambient conditions.
B/W: The camera is always in Black & White mode regardless of the ambient conditions.
EXTERN:
Here you can activate the EXTERN function
to activate the external Day & Night
connector on the rear panel of the camera.
If you select EXTERN, a submenu appears
where you can make finer adjustments.
- SMART IR [OFF, ON]: Activate or deactivate the Smart IR function. This will reduce the
shutter speed, if the image is overexposed in B&W mode.
- ANTI-SAT. [0-20]: Use the Anti-Saturation function to adjust the IR intensity to your
needs. A higher value will reduce the IR intensity.
- DELAY [MIDDLE, HIGH, LOW]: Set the delay time for switching between COLOUR
and B/W. If set to HIGH, the camera will stay longer in the current mode, before it
switches to the other mode.
7
English
