AWB (Auto White Balance):
In this mode, white balance works within its colour temperature range. This mode
computes the white balance value output using the colour information from the entire
screen. It outputs the proper value using the colour temperature radiating from a black
subject.
AWC-SET:
This mode is set to the current white balance condition and keeps ist value. Select this
mode and then press the SET key. If there is a change in location or light source, please
repeat this procedure.
MANUAL:
Can be used for fine adjustment. Set the
White Balance by first using AUTO or AWB
and then change to MANUAL and press the
SET key. Increase or decrease the value of
R-Gain (Red) and B-Gain (Blue) while
monitoring the colour of the image.
- C-TEMP [3000K, 5000K, 8000K]: Adjust
the colour temperature based on the
illumination source.
- R-GAIN: Adjusts the White Balance for the
colour Red.
- B-GAIN: Adjusts the White Balance for the
colour Blue.
6.6. DNR (Digital Noise Reduction)
This function is used to improve the picture quality by filtering the noise which is
generated under low bright light conditions. You can set 3 different levels [LOW,
MIDDLE, HIGH] here.
6.7. Image
When selecting
↵
, the following submenu will appear.
Here you can optimise the image quality by
adjusting different options.
SHARPNESS [0 ~ 20] :
Adjusts the image sharpness. If the level
goes up excessively, it may affect the video
image and generate a noise.
COLOR GAIN [0 ~ 20] :
Adjusts the colour gain of the camera. If set
to high values, the colours will be more
saturated.
9
English
