31
ENGLISH
HOmE NETwORK
------------------------------------------------------------------------------------------------------------
wireless network settings
There are two ways of making the wireless net-
work settings.
A
Automatic connection,
»Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B
Manual connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1
Open the menu with »
i
«.
2
Select »CONNECTED APPS« with »
V
« or »
Λ
«
and confirm with »
●
«. Menu is displayed.
3
Select »Network Settings« with »
V
« or »
Λ
«
and confirm with »
●
«.
– »NETWORK SETTINGS« menu is displayed.
4
Select »Connection« with »
V
« or »
Λ
« and
then select »Wireless« with »
<
« or »
>
«.
5
Select »Connection Type« with »
V
« or »
Λ
«
and then select »Automatic« with »
<
« or
»
>
«.
6
Select »Select Access Point« with »
V
« or
»
Λ
« and confirm with »
●
«.
– »Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
7
Select the network that you want to connect
with »
V
«, »
Λ
«, »
<
« or »
>
« and confirm with
»
●
«.
– Wireless connection password screen is
displayed.
8
Select the required character with »
V
«, »
Λ
«,
»
<
« and »
>
« and move to the next character
with »
●
«.
– Select »
ABC
« for uppercase and »
abc
«
for lower case and confirm with »
●
«.
– Select »
?@123
« for numbers and symbols
and confirm with »
●
«.
– Enter the password, select »
Confirm
« with
»
V
«, »
Λ
«, »
<
« or »
>
« and confirm with
»
●
«.
Note:
7
In WEP encryption system, more than one
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
9
Select »Connect« with »
« (red) to establish
the modem connection.
– The mesage »Testing ... Please waite«
appears.
10
Press »
« (green) to make sure that the
network connection is established with the
current settings.
– The messages »Testing ... Please waite«
appears, after successfull announcement
the messages »Connecting To Gateway:
Successful« and then the MAC address.
11
Press »
i
« to end the setting.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
