ENGLISH
56
CONVENIENCE FuNCTIONS
------------------------------------------------------------------------
Setting the date and time
Your television set detects the difference in time
to Greenwich Mean Time (GMT) automatically,
as long as the channel selected transmits a time
signal. You can also set the difference in time
manually – for example, when the correct time
is not detected automatically or does not corre-
spond to local time for other reasons.
1
Select the line »Time Adjustment« with »
V
«,
then select the option »Manual« with »
<
«
or »
>
«.
– The lines »Time Zone« and »Daylight Sav-
ing« are active.
2
Select the line »Time Zone« with »
V
« and
press »
●
« to confirm.
– The »Select Time Zone« menu appears.
3
Select the appropriate time zone with » »
<
«,
»
>
«, »
V
« or »
Λ
and press »
●
« to confirm.
4
Select the line »Daylight Saving« with »
V
«
and use »
<
« or »
>
« to set the option »Auto«,
»Off« or »On«.
5
Press »
i
« to finish the setting.
Timer settings
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1
Select the line »Sleep Timer« with »
V
« or
»
Λ
«.
2
Enter the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
set the switch-off time to »Off«.
3
Press »
i
« to end the set-up.
Switch-on timer
In the »Auto On« menu you can enter a switch-
on time for the television. After the preset time
has elapsed, the television switches on from
standby – at the preselected volume and the pre-
selected television channel.
1
Select the line »Auto On« with »
V
« or »
Λ
«
and press »
●
« to confirm.
2
Select the line »Mode« with »
V
« or »
Λ
« and
use »
<
« or »
>
« to select when the television
should switch on.
3
Select the line »Input Source« with »
V
« or »
Λ
«
and use »
<
« or »
>
« to select the input source.
4
Select the line »Service Type« with »
V
« or »
Λ
«
and use »
<
« or »
>
« to select the preferred op-
tion (ATV, DTV, Radio or DATA).
5
Select the line »Channel« with »
V
« or »
Λ
«
and use »
<
« or »
>
« to select the preferred
channel.
Note:
7
The line »Channel« is only active when the in-
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
