ENGLISH
15
Connecting the power supply unit
You can run the DVD player using the power unit supplied or with
the built-in rechargeable battery.
If the DVD player is supplied with voltage from the mains when
switched on the in-built battery is automatically switched off.
Caution:
Always switch the DVD player off before connecting or discon-
necting to the mains.
Only use the power unit supplied. Using another power supply
unit could lead to malfunction and damage.
Unplug the power supply unit if you are not using it.
1
Insert the power supply unit into the »
DC 13,5 V
« socket on
the left of the DVD player.
2
Plug the power supply unit into the wall socket.
Caution:
The only way to disconnect the device from the mains supply is
to unplug the adapter.
Activating the remote control battery
1
When using it for the first time, activate the remote control bat-
tery by pulling on the film protruding from the battery holder.
Changing the battery
1
Pull out the battery holder.
2
When inserting the battery (3 V, lithium), make sure the positive
terminal (+) is facing upwards.
3
Push the battery holder back into the remote control until it
latches into place.
Note:
If the DVD player no longer reacts properly to remote control
commands, the battery may be flat. Always remove used bat-
teries. The manufacturer accepts no liability for damage caused
by leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
CONNECTION/PREPARATION
__________
PIC.
USB
E
-POR
T
AV
O
U
T
SD
DC 13,5V
PIC.
OK
USB
E
-POR
T
A
V
OUT
SD
DC 13,5V
12 V
