18
Specifying the video signal at the Euro AV (TV)
output
You can choose »CVBS« (normal picture quality), »RGB« (high
picture quality) or »S-VIDEO« (high picture quality). The default
setting is »RGB«.
1
Select »Video Output« by pressing »
CH
Ľ
« or »
CH
Ń
«.
2
Press »
ľ
VOL
« or »
ı
VOL
« to select »CVBS« or »RGB«.
– You cannot select the S-VIDEO signal, because it is always
transmitted by the Euro AV output (TV).
3
Press »
MENU
« to go to the next setting.
Setting the local time
You must set the local time so that the electronic programme guide
always shows you the current programmes at the right time.
Note:
The »Local Time Setup« menu is in the main menu under
»User Setting«.
1
Select »Time Zone« with »
CH
Ľ
« or »
CH
Ń
«.
2
Press »
ľ
VOL
« or »
ı
VOL
« to select your time zone.
3
Select »Summer Time« with »
CH
Ľ
« or »
CH
Ń
« and press »
ľ
VOL
« or »
ı
VOL
« to select »On« or »Off«.
4
Press »
MENU
« to go to the next setting.
Tuner configuration
You must configure Tuner 2 according to your antenna and LNB.
Note:
The »Tuner Configuration« menu is in the main menu under
»Installation«.
1
In »Tuner 2 Configure« press »
ľ
VOL
« or »
ı
VOL
« to select
the setting:
– »Separate«:
if you are using two LNBs.
– »Loopthrough«:
if you are only using one LNB.
2
Select »Store« with »
CH
Ľ
« or »
CH
Ń
« and press »
OK
« to
confirm.
3
Press »
MENU
« to go to the next setting.
BASIC SETTINGS
________________________________________
