Grundig Digta 420 User Manual Download

Page: 112 / 112

112

MMC/SD cards with new Digta Cards.

----- »EXT NO PIN PROTECTION« – Dictations on

external memory cards (Digta Card) cannot be pro-

tected using the PIN/PUK* function.
Remedy: Press the right-hand selection button » «

to confirm that you want to use an external memory

card without PIN* protection.

----- »DEVICE LOCKED« – The PIN was entered incor-

rectly nine times.
Remedy: Enter PUK.

----- »NO FIRMWARE« – If an old firmware version is

needed (when the machine is switched on, the right

selection key and the “new” button are pressed at

the same time ) no firmware file is found.

Remedy: Copy a file with the name gh0420.hex into

the SYSTEM folder and start the load of the old ver-

sion afterwards.

All messages with different numbers and the display

“UNKNOWN ERROR”:
Turn the dictation machine off and then back on. If the

machine does not turn on normally, take out the batteries

and then reinsert them. Turn the machine then back on. If

the error message still appears, please contact your dealer

or technical customer service. You can help the customer

service solve your problem much more quickly if you report

the steps taken to produce the error and the error number

displayed.
Hotline, E-Mail:

www.grundig-gbs.com under Support/Contact info

MESSAGES, ERROR NUMBERS

_____________

BDA 05: ab V3.11 B367

02/2011

Summary of Contents for Digta 420

















































































































Search results

Summary of Contents for Digta 420

Reviews:

Related manuals for Digta 420

Brands by name

Popular brands

Grundig Digta 420, User Manual

Search results

Summary of Contents for Digta 420

Reviews:

Related manuals for Digta 420

Brands by name

Popular brands