ENGLISH
9
Connecting a hi-fi system
1
Plug a standard cinch cable into the »
Audio Out R L
« on the digital
receiver and the corresponding input sockets on the hi-fi system.
Connecting a digital multi-channel amplifier
1
Plug a standard cinch cable into the »
Audio Out SPDIF
« socket on
the digital receiver and the corresponding socket on the digital multi-
channel amplifier.
Connecting the mains adapter
1
Plug the plug of the mains adapter supplied into the »
Ó
12 V
«
socket on the digital receiver.
2
Plug the mains adapter into the socket.
Notes:
Only plug the device into the mains socket after you have connected the
television and the antenna.
The only way to disconnect the digital receiver from the mains supply is
to pull the plug.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert the batteries (Mignon type, for example UM-3 or AA, 2 x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3
Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control com-
mands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
CONNECTION AND PREPARATION
