CUC 2058 D / 2059 D
Allgemeiner Teil / General Section
GRUNDIG Service
1 - 29
3. Picture Settings
Basic Adjustment
Call up the picture settings menu with the red button (eye). Via the
menu guide it is possible to change the contrast, picture sharpness and
tint (only NTSC sources).
The analog values for contrast, picture sharpness and tint are stored
automatically when leaving the menu.
4. Sound Settings
4.1 Sound Switching:
Call up the sound settings menu with the blue button (ear). Different
types of sounds are available dependent on the TV standard:
- "Mono": in the case of pure mono transmissions
- "Mono A / Mono B": in the case of 2-channel sound transmissions
- "Stereo / Mono": in the case of poor stereo sound quality, the sound
can be switched over to mono
- "Stereo / Analog"
- "Stereo A / Stereo B / Analog"
The forced-mono, balance, bass, treble and similar values are stored
automatically when leaving the menu.
4.2 Headphone Sound Switching
Call up the sound settings menu with the blue button. Dependent on the
TV standard, different settings are possible for the headphones:
- "Mono A / B", independent of the loudspeakers
- "Stereo A / Stereo B / Analog", independent of the loudspeakers
With all other options, separate selection of the sound for the head-
phones and loudspeakers is not possible.
5. Open Service Settings
5.1 Maximum Programme Number (reversing point)
Call up the programme number which is to be the highest selectable
programme position. With button "
6
" select the dialog line "MANUAL
TUNING" via the "DIALOG CENTER". Following the menu guide, enter
"C 00" in the dialog line channel. Confirm with "OK" and terminate the
menu. After this setting only those programme positions can be
selected with the "P+/P-" buttons in Programme Mode which are lower
than the "C 00" position.
5.2 Forced Chroma Switching
Call up the dialog line "Color" via "DIALOG CENTER" –> "SERVICE"
with button "
6
". With the buttons
3 4
it is possible to force the automatic
chroma standard switching function into "PAL" or "NTSC" on a per-
programme basis under poor reception conditions.
5.3 Switching off the Blue Screen Background
Call up the dialog line "Blue Screen" via "DIALOG CENTER" –>
"SERVICE" with button "
6
". When this function is set to "off" the blue
background is switched off (e.g. when the aerial signal is missing).
5.4 Black Screen when Changing the Programme
Call up the dialog line "Black Screen" via "DIALOG CENTER" –>
"SERVICE" with button "
6
". When this function is set to "on" the screen
is blanked when changing the programme.
6. Service Settings for the Dealer
6.1 Service Menu
Call up the Service Menu with button "
6
" via "DIALOG CENTER"
–> "SERVICE" –> Service Code .
Having entered the code number "8500" the dealer can change the
following settings under menu guide:
- GEOMETRY
- WHITE ADJUSTMENT
- AGC
- OSD horizontal
- OSD vertical
- Hotel
- Tube
- Cut-off align
- Overscan
- NTSC 3,6
Alignment: page 2-3
6.2 OSD Position
Call up the dialog line "OSD" with button "
6
" via "DIALOG CENTER"
–> "SERVICE" –> Service Code "8500".
With the
3 4
buttons it is possible to shift the on screen display in the
horizontal or vertical direction and to store this position "with mem.".
6.3 Hotel Mode
6.3.1 Activating the Hotel Mode
Call up the dialog line "Hotel" with button "
6
" via "DIALOG CENTER"
–> "SERVICE" –> Service Code "8500".
With activated "Hotel Mode":
- it is no longer possible to call up the "DIALOG CENTER" menu with
button "
6
".
- the last volume setting is stored as the maximum level possible.
6.3.2 Deactivating the Hotel Mode
Depress and hold button "
6
" on the Remote Control while switching the
TV set on with the mains switch. Under the "SERVICE" menu switch
the Hotel Mode off.
6.4 Deactivating the Protection Circuit
Depress and hold button "
6
" on the Remote Control while switching the
TV set on with the mains switch. As long as the Service Menu is
displayed the protection circuit of the TV set is not evaluated on video
processor IC34015-(50).
7. Setting the Analog Values
Maximum
Optimum
Brightness
63
32
Colour contrast
63
40
Black/white contrast
63
48
Volume
63
30
Headphone volume
63
50
Tint
63
32
Bass
25
15
Treble
25
18
Sharpness
5
2
The analog values are stored automatically:
after about 8 seconds,
on switching to Standby mode,
on switching over from TV to AV mode,
on changing the individual AV settings.
Having stored the minimum volume level the volume indicator bar is
displayed for about 10 seconds when switching the TV receiver on.
With "AUX" –> "OK" it is possible to re-set the optimum values for
picture and sound.
The optimum values are read out from EEPROM IC82005.
8. Audio / Video Connectors
Re-recording possibilities:
AV 1
–>
AV 2 (EURO-AV1 –> EURO-AV2 with 2 AV sockets)
AV 2
–>
AV 1 (EURO-AV2 –> EURO-AV1 with 2 AV sockets)
AV 3
–>
AV 1 (Camera –> EURO-AV1 with 2 AV sockets)
Re-recording is activated automatically by selecting button "0/AV" of
the source.
Securing a re-recording:
A re-recording is secured by selecting the source with button "0 /AV"
–> button "AUX" –> button "0/AV", indication "copy on". The pro-
gramme can be changed. The securing function can be cancelled by
repeating this sequence: "Copying off".
Notes:
- Should all video signal paths be in use on selection of AV because
Copy is active for example, this situation is identified and the TV
switches over to the next technically possible AV position.
- The blue screen background does not appear in all AV settings.
