ENGLISH-10
O
OP
PE
ER
RA
AT
TIIO
ON
NS
S ((cco
on
nttiin
nu
ueed
d))
Basic Operation
The Basic operations shown in Table 2 can be controlled from the projector control panel or the
supplied remote control transmitter. (items indicated by * may be used from the control panel)
NOTE:
Use the remote control transmitter at a distance of approximately 3m from the sensor on the
front of the projector, and within a range of 30° left-right. Strong light and obstacles will
interfere with operation of the remote control transmitter.
Table 2 . Basic Operation
Item
Description
INPUT
SELECT
Changes in input signal in sequence:
Press INPUT
button.
*
RGB1
→
RGB2
→
VIDEO
→
S-VIDEO (
→
RGB1)
Select RGB input:
Press RGB button.
VIDEO/S-VIDEO
→
RGB1/RGB2 RGB2
↔
RGB1
Select VIDEO/S-VIDEO input:
Press VIDEO button.
RGB1/RGB2
→
VIDEO/S-VIDEO S-VIDEO
↔
VIDEO
•
The selected signal name is displayed for approximately three seconds
when the input signal is changed.
POSITION
Set/Clear position adjustment mode:
Press POSITION button.
The [
] icon is displayed in the POSITION mode.
Image position adjustment:
Press the
,
,
and
buttons in the
position adjustment mode.
•
Valid only in the MAGNIFY mode with VIDEO/S-VIDEO input.
•
The [
] icon is extinguished, and the position adjustment mode cleared
automatically, after approximately ten seconds of inactivity.
,
,
and
buttons may operate as the mouse control button.
Refer to P.4.
RESET
*
Initialize menu items:
Select an item and press the RESET
button.
Initialize position adjustment:
Press the RESET
button
and the POSITION mode.Valid only when RGB signal is input.
•
Valid except for VOLUME, LANGUAGE and H PHASE.
•
RESET button may operate as the mouse control button. Refer to P.4.
MAGNIFY
Set MAGNIFY mode:
Press the MAGNIFY
button.
Move magnified area:
Run Position Adjustment in MAGNIFY mode.
Adjust magnification:
Press
MAGNIFY / in
MAGNIFY
mode.
Clear MAGNIFY mode:
Press MAGNIFY
button.
•
MAGNIFY is cleared by running or setting AUTO, ASPECT, INPUT
SELECT or VIDEO, or by changing the input signal.
OFF
FREEZE
Set/Clear FREEZE mode:
Press FREEZE button.
The [II] icon is displayed, and the image frozen, in the FREEZE mode.
•
FREEZE is cleared by running or setting POSITION, VOLUME, MUTE,
Auto Adjust, BLANK ON/OFF, or MENU ON/OFF, or by changing the
input signal.
•
Do not forget to clear frozen static images.
