background image

28

TELEPHONING

_______________________

Switching the keypad lock 
on and off

You can protect the keypad on the handset from being
inadvertently pressed. 

Switching on the keypad lock 
1

In the idle mode, press »

g

g

« until the »

« icon

appears.
– The keypad on the handset is locked.

Note:

You can still accept an incoming call. 

Switching off the keypad lock
1

In the idle mode, press and hold down »

g

g

« again.

Switching the handset on and off

Switching off the handset
1

In the idle mode, press »

« until the display is

switched off. 
– You cannot make any calls.

Switching on the handset
1

Press »

« from the switched off state.

– The handset is switched on again.

Switching the microphone on and off

You can switch the microphone on and off during a
call.

1

Press the »

« function button on the right during

the call.

– Display: »Mute on«, the microphone is switched

off.

2

To switch on, press the »

« function button on the

right again.

Adjusting the volume

You can adjust the volume during the call. 

You can find out how to permanently set the volume in
the section on “Settings” on page 62.

1

During the call, adjust the volume using »

ĭĭ

« or »

ĿĿ

«.

K

K

Summary of Contents for CALIOS 1







































































Reviews: