Grundig 32 VLC 9140 S, Manual

Page: 55 / 63

­55
ENGLISH
8 Start the scan with »

« ­ (red).
– All channel and favourites lists will be
deleted and compiled anew.
note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
7
You can abort the search by pressing
» menu «.
9
Press »
menu
« to end the setting.
searching­for­television­channels­
from­the­cable­provider­manu-
ally
1 Open the menu with » menu «.
2
Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press »
oK
« to confirm.
– The »SOURCE SETUP« menu appears.
3
Select the line »Source« with »
v
« or »
Λ
«
and press »
oK
« to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »
oK
« to confirm.
4
Select » Digital Manual Tuning« with »
v
« or
»
Λ
« and press »
oK
« to confirm.
– The menu appears.
5 Enter the four-digit frequency with » 1­...­0 «
and press »
oK
« to confirm.
– The search starts after confirming, the
channels found are displayed in the »Re-
sults« menu.
6 Press » menu « to finish the setting.
speCiAl­settinGs
­----------------------------------------------------------------------------------------------------------
searching­for­digital­terrestrial­
tv­channels­automatically
1
Open the menu with »
menu
«.
2 Select the line »SOURCE SETUP« with »
v
«
or »
Λ
« and press » oK « to confirm.
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
v
«
or »
Λ
« and press » oK « to confirm.
Select the option »Air« with »
<
«, »
>
«, »
v
« or
»
Λ
« and press » oK « to confirm.
Caution:
7
The antenna power supply (line »Active
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power« with »
v
«
or »
Λ
«. Switch on the antenna power supply
for the antenna with »
<
« or »
>
« (»On«).
5 Select the line »Automatic Channel Search«
with »
v
« or »
Λ
« and press » oK « to con-
firm.
– The menu appears.
6
Select the line »Country« with »
v
« or »
Λ
«
and press »
oK
« to confirm. In the country
selection menu, select the country with »
<
«,
»
>
«, »
v
« or »
Λ
« and press »
oK
« to confirm.
7 Select the line »Scan Typ« with »
v
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
8 Start the scan with »

« ­ (red).
– All channel and favourites lists will be
deleted and compiled anew.
note:
7
After starting the scan, a security query will
appear. Press »

« (green) to confirm the
option »Yes«.
– The »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– The scan is complete as soon as the