ENGLISH
32
SPECIALSETTINGS
-----------------------------------------------------------------------------------------------------
Tuningdigitaltelevisionstations
This search deletes all television stations included
in the channel list!
Tuningalldigitaltelevisionstations
withcableconnectionbyauto
tuning
1
Open the menu with »
i
«.
– The »PICTURE« menu appears.
2
Select the »CHANNEL SETUP« menu with »
<
«
or »
>
«.
CHANNEL SETUP
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module
Removed
Select
Exit
Active Antenna Power
On
s
s
s
s
s
Back
Z
3
Select »Auto Tuning« with »
V
« or »
Λ
« and
confirm with »
●
«.
4
Select »Country Selection« by pressing »
V
«
or »
Λ
« and press »
<
« or »
>
« to make the set-
ting.
5
Select the »Scan Type« with »
V
« and press
»
<
« or »
>
« to select the »DTV«.
6
Select the »TV Connection Type« with »
V
«.
Press »
<
« or »
>
« to select the »Cable« and
press »
●
«.
– The menu for the search parameters is dis-
played, »Scan Type« is active.
7
Press »
<
« or »
>
« to select the scan type
»quick« or »Full«.
– »quick« scanning function sets the channels
according to the cable operator information
in the broadcasting signal.
– Network ID« performs the installation that
is suitable to your network. If you know the
Network ID, please enter it; otherwise please
select Auto Recommended settings for »Fre-
quency« or »Symbol Rate« is »Auto«.
– Select »Full« if the scanning can not be per-
formed with »Fast« option.
– All current channels are set and stored in
»Full« scanning. This scanning process can
take a long time. This option is recommend-
ed if your cable operator does not support
fast scanning function.
Notes:
7
You can accelerate the search. To do
this, you need information about the fre-
quency and network ID. You are usually
able to get this data from your cable op-
erator or find it in forums on the Internet.
For example, the frequency 402MHz and
network ID 61441 can be entered for Ger-
many.
8
Start the search with »
●
«.
9
Select the security query (»Yes« button) with
»
<
« or »
>
« and press »
●
« to confirm;
or
select »No« with »
<
« or »
>
« (if you do not
want to start the search) and press »
●
« to con-
firm.
– The »Searching...« menu appears, and the
search for digital TV stations begins. This
may take several minutes depending on the
number of television stations received.
– The search is ended when the »Programme
Table« appears.
Note:
7
You can stop the search by pressing »
i
«.
10
Press »
i
« to end the settings.
