11
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Searchingfortelevisionstations
The television has an automatic tuning function,
which searches for analogue TV channels and
digital ones.
You start the search and can then sort the televi-
sion stations into your order of preference.
There are 550 presets for digital channels and
99 for analogue channels, to which you can
assign TV stations from the antenna or from the
cable connection (analogue channels).
1
Press »
8
«, »
1…0
« or »
P+
« or »
P–
« to switch
on the television from standby mode.
– The »Installation Guide« menu appears
when the device is first switched on.
Installation Guide
Language Settings
English
Active Antenna Power
Off
Select
Exit
Auto Tuning
s
2
Press »
<
« or »
>
« to select the language.
Help:
7
If the »Installation Guide« menu does not ap-
pear on the screen, make the setting by fol-
lowing the instructions on returning the tele-
vision to its factory condition on page 20.
Note
7
The antenna power supply may only be
switched on if the antenna is actually an
active indoor antenna with a signal ampli-
fier and it is not already supplied with a
voltage via a mains plug (or similar supply).
Otherwise you may cause a short circuit
and irreparably damage your antenna.
3
Select the »Active Antenna Power« with »
V
«
or »
Λ
«. Press »
<
« or »
>
« to switch on the an-
tenna voltage »On« (only DVB-T channels).
4
Select »Auto Tuning« with »V« or »
Λ
« and con-
firm with »
●
«.
–»Country Selection« is active.
5
Press »
<
« or »
>
« to select the country.
6
Select the »Scan Type« with »
V
« or »
Λ
«.
Press »
<
« or »
>
« to select whether you want to
search for only digital television stations (DTV),
only analogue television stations (ATV) or both
(ATV & DTV).
7
Select »Time zone« with »
V
« or »
Λ
«.
Press »
<
« or »
>
« to select time zone.
8
Select »TV Connection Type« with »
V
« or
»
Λ
«.
Press »
<
« or »
>
« to whether you want to
search for cable connection »Cable« or aerial
connection (Aerial).
– »Aerial«, search for terrestrial TV pro-
grammes (DVB-T);
or
– »cable«, search for TV programmes offered
by your cable provider (DVB-C).
Help:
7
If you select »Cable« the screen for select-
ing the scan type appears. See the chapter
„Tuning all digital television stations with
aerial connection by auto tuning“ on page
32, Point
7
.
9
Press »
●
« to start the search.
– The »Searching...« menu appears, and the
search for TV stations begins. This may take
several minutes depending on the number of
television stations received.
– The search is ended when the »Programme
Table« appears.
Note:
7
The search can be ended prematurely with
»
i
«.
