Grundig 26 VLC 4010 C, Manual, Page: 25 / 33

ENGLISH
26­
SPECIAL­SETTINGS
­-----------------------------------------------------------------------------------------------------
Tuning­all­digital­television­stations­
with­aerial­connection­by­auto­tun-
ing
1 Open the menu with » M «.
– The »PICTURE« menu appears.
2
Select the »CHANNEL SETUP« menu with
»
r
« or »
e
«.
3
Select »Auto Tuning« with »
q
« or »
w
« and
confirm with »
OK
«.
4 Select »Country Selection« by pressing »
q
«
or »
w
« and press »
r
« or »
e
« to make the
setting.
5 Select the »Scan Type« with »
q
« and press
»
r
« or »
e
« to select the »DTV«.
6 Select the »TV Connection Type« with »
q
«.
Press »
r
« or »
e
« to select the »Aerial«
7 Press » OK « to start the search for TV chan-
nels.
– The »Searching...« menu appears, and the
search for digital TV stations begins. This
may take several minutes depending on the
number of television stations received.
– The search is ended when the »Programme
Table« appears.
Note:
7
You can stop the search by pressing »
M
«.
6
Press »
M
« to end the setting.
Tuning­the­digital­television­stations­
with­aerial­connection­–­by­enter-
ing­the­channel­numbers
1 Open the menu with » M «.
– The »PICTURE« menu appears.
2
Select the »CHANNEL SETUP« menu with
»
r
« or »
e
«.
3 Select »Digital Manual Tuning« with »
q
« or
»
w
« and press »
OK
« to confirm.
– The »Digital Manual Tuning« menu ap-
pears.
4
Enter channel number directly with »
1­...­0
«
and press »
OK
« to confirm.
– The search is finished when the channels
found appear in the list.
5 Press »
M
« to end the setting.
Tuning­ analogue­ television­
stations
These settings are only necessary if you can not
receive any digital stations or if you want to re-
tune all analogue channels.
The television station can be set directly or using
the search.
The analogue television stations are listed in the
channel list after the digital television stations.
Switching­the­television­to­analogue­
channels
1 Open the »INPUT SOURCE« menu by pressing
» «.
2
Select input source »ATV« with »
q
« or »
w
« and
press »
OK
« to confirm.
Note:
7
Additional operations are explained in the
following sections.
Re-tuning­ all­ analogue­ television­
channels
Note:
7
Plug the rooftop antenna cable (for analogue
television stations) into the » ANT­IN « socket
on the television.
1 Open the menu with » M «.
– The »PICTURE« menu appears.
2 Select the »CHANNEL SETUP« menu with »
r
«
or »
e
«.
3
Select »Autotuning« with »
q
« or »
w
« and con-
firm with » OK «.
4
Select »Country Selection« by pressing »
q
«
or »
w
« and press »
r
« or »
e
« to make the set-
ting.
5 Select the »Scan Type« with »
q
«. Press »
r
« or
»
e
« to select the »ATV« display.
6 Start the search with » OK «.