background image

4

English (US)

English (US) Installation and operating instructions

Original installation and operating 
instructions.

CONTENTS

Page

1. General warning

2. Limited warranty

Products manufactured by GRUNDFOS PUMPS 
CORPORATION (Grundfos) are warranted to 
the original user only to be free of defects in 
material and workmanship for a period of 
24 months from date of installation, but not more 
than 30 months from date of manufacture. 
Grundfos' liability under this warranty shall be 
limited to repairing or replacing at Grundfos' 
option, without charge, FOB Grundfos' factory or 
authorized service station, any product of 
Grundfos' manufacture. Grundfos will not be 
liable for any costs of removal, installation, 
transportation, or any other charges which may 
arise in connection with a warranty claim. 
Products which are sold but not manufactured 
by Grundfos are subject to the warranty 
provided by the manufacturer of said products 
and not by Grundfos' warranty. Grundfos will not 
be liable for damage or wear to products caused 
by abnormal operating conditions, accident, 
abuse, misuse, unauthorized alteration or repair, 
or if the product was not installed in accordance 
with Grundfos' printed installation and operating 
instructions.

To obtain service under this warranty, the 
defective product must be returned to the 
distributor or dealer of Grundfos' products from 
which it was purchased together with proof of 
purchase and installation date, failure date, and 
supporting installation data. Unless otherwise 
provided, the distributor or dealer will contact 
Grundfos or an authorized service station for 
instructions.

Any defective product to be returned to 
Grundfos or a service station must be sent 
freight prepaid; documentation supporting the 
warranty claim and/or a Return Material 
Authorization must be included if so instructed.

GRUNDFOS WILL NOT BE LIABLE FOR ANY 
INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, LOSSES, OR EXPENSES ARISING 
FROM INSTALLATION, USE, OR ANY OTHER 
CAUSES. THERE ARE NO EXPRESS OR 
IMPLIED WARRANTIES, INCLUDING 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE, WHICH EXTEND 
BEYOND THOSE WARRANTIES DESCRIBED 
OR REFERRED TO ABOVE.

Some jurisdictions do not allow the exclusion or 
limitation of incidental or consequential 
damages and some jurisdictions do not allow 
limit actions on how long implied warranties may 
last. Therefore, the above limitations or 
exclusions may not apply to you. This warranty 
gives you specific legal rights and you may also 
have other rights which vary from jurisdiction to 
jurisdiction.

1.

General warning

4

2.

Limited warranty

4

3.

Symbols used in this document

5

4.

Product introduction

5

4.1

Introduction

5

4.2

Delivery and handling

5

4.3

Applications

6

4.4

Features and benefits

6

5.

Operating conditions

6

5.1

Control signal input range options

6

6.

Installation

7

6.1

Installation requirements

7

6.2

Mechanical installation

7

6.3

Electrical installation

8

7.

Settings

9

7.1

Setting the dip switches

9

7.2

Speed settings

9

8.

After installation

10

9.

Quick reference

10

10.

Disposal

11

Warning

Prior to installation, read these 
installation and operating 
instructions. Installation and 
operation must comply with local 
regulations and accepted codes of 
good practice.

Warning

This booklet should be left with the 
owner of the pump for future 
reference and information 
regarding its operation.

Summary of Contents for Variable Speed

































Reviews: