background image

HR: Izjava o izvedbi

Izjava EU o izjavi u skladu s aneksom III uredbe

(EU) br. 305/2011(Uredba za građevinske

proizvode)

1. Jedinstveni identifikacijski kod vrste proizvoda:

EN 12050-1 ili EN 12050-2 (SE1.50).

2. Vrsta, broj serije, serijski broj ili bilo koji drugi element koji

omogućuje identificiranje građevinskog proizvoda u
skladu sa člankom 11(4):

SE1, SEV crpke označene s EN 12050-1 ili EN
12050-2 (SE1.50) na natpisnoj pločici.

3. Namjena ili uporabe građevinskog proizvoda u skladu s

primjenjivim harmoniziranim tehničkim specifikacijama,
kao što je predvidio proizvođač:

Crpke za ispumpavanje otpadnih voda s fekalijama,
označene s EN 12050-1 na natpisnoj pločici.

Crpke za ispumpavanje otpadnih voda bez fekalija,
označene s EN 12050-2 na natpisnoj pločici.

4. Naziv, registrirani trgovački naziv ili registrirani zaštitni

znak i adresa za kontaktiranje proizvođača u skladu sa
člankom 11(5):

Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro
Danska.

5. NIJE RELEVANTNO.
6. Procjena jednog ili više sustava i provjera stalnosti rada

građevinskog proizvoda, kao što je određeno aneksom V:

Sustav 3.

7. U slučaju izjave o izvedbi za građevinski proizvod

pokriven harmoniziranim standardom:

TÜV Rheinland LGA Products GmbH, identifikacijski
broj: 0197.
Izvršite ispitivanje u skladu s EN 12050-1 ili EN
12050-2 (SE1.50) u okviru sustava 3.
(Opis zadataka trećih strana, kao što je definirano
aneksom V)

TÜV Rheinland LGA certifikat br. 60139390 i
60133405 (EN 12050-1); 60139391 i 60133400 (EN
12050-2).
Ispitana vrsta i nadzirano.

8. NIJE RELEVANTNO.
9. Izjavljena izvedba:

Proizvodi obuhvaćeni ovom izjavom o izvedbi u skladu su
s osnovnim karakteristikama i zahtjevima za izvedbu, kao
što je definirano u nastavku:

Uporabljeni standardi: EN 12050-1:2001 ili EN
12050-2:2000 (SE1.50).

10
.

Izvedba proizvoda identificirana u točkama 1 i 2 u skladu
je s izjavljenom izvedbom u točki 9.

HU: Teljesítménynyilatkozat

EU teljesítménynyilatkozat a 305/2011 számú EU

rendelet III. mellékletének megfelelően(Építési

termék rendelet)

1. A terméktípus egyedi azonosító kódja:

EN 12050-1 vagy EN 12050-2 (SE1.50).

2. Típus, adag, sorozatszám, vagy bármilyen más olyan

elem, amely lehetővé teszi az építési terméknek a 11.
cikk (4) bekezdése alapján megkövetelt azonosítását:

SE1, SEV szivattyúk EN 12050-1 vagy EN 12050-2
(SE1.50) jelöléssel az adattáblán.

3. Az építési termék tervezett felhasználása vagy

felhasználásai, a vonatkozó harmonizált műszaki
előírásoknak megfelelően, a gyártó szándéka szerint:

Fekáliatartalmú szennyvíz szivattyúzására szolgáló
szivattyúk, EN 12050-1 jelöléssel az adattáblán.

Fekáliamentes szennyvíz szivattyúzására szolgáló
szivattyúk, EN 12050-2 jelöléssel az adattáblán.

4. A gyártó neve, védjegye, bejegyzett kereskedelmi neve

és értesítési címe a 11. cikk (5) bekezdése alapján
megkövetelt módon:

Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro
Dánia.

5. NEM RELEVÁNS.
6. Az építési termék teljesítmény állandóságának

értékelésére és ellenőrzésére vonatkozó rendszer vagy
rendszerek, az V. mellékeltben meghatározott módon:

3-as rendszer.

7. Olyan építési termékre vonatkozó teljesítménynyilatkozat

esetén, amelyre kiterjed egy harmonizált szabvány:

TÜV Rheinland LGA Products GmbH, azonosító
szám: 0197.
Az EN 12050-1 vagy EN 12050-2 (SE1.50) szerint
elvégzett teszt, a 3-as rendszer keretében.
(harmadik fél feladatainak leírása az V. mellékletben
meghatározott módon)

TÜV Rheinland LGA 60139390 és 60133405
tanúsítvány (EN 12050-1); 60139391 és 60133400
(EN 12050-2).
Típustesztelve és felügyelve.

8. NEM RELEVÁNS.
9. Megadott teljesítmény:

Azok a termékek, amelyekre ez a teljesítménynyilatkozat
vonatkozik, rendelkeznek azokkal az alapvető
jellemzőkkel és kielégítik azokat a teljesítményre
vonatkozó követelményeket, amelyeket alább
ismertetünk:

Alkalmazott szabványok: EN 12050-1:2001 vagy EN
12050-2:2000 (SE1.50).

10
.

Az 1-es és 2-es pontban azonosított termék teljesítménye
összhangban van a 9. pontban megadott teljesítménnyel.

947

Declaration of performance

Summary of Contents for SE1 100



























































Reviews: