background image

English (GB)

4

3. Receiving the product

3.1 Transporting the product

The pit must be transported in a horizontal position and anchored 
to the transport vehicle. Accessories, if any, must be secured 
inside the pit.

The customer must provide appropriate lifting equipment at the 
place of unloading. The weight of the pit is stated on the 
nameplate.

Precautions during transport and handling

• Do not dump the pit from the lorry.
• Use approved straps of textile or similar materials when lifting 

the pit on to or down from a lorry or moving it on the 
construction site.

• Handle and lift the pit according to local regulations.
• Do not drag the pit over the ground.
• Point loads must not occur.
• The pit must not be exposed to sharp edges.
• Fix the pit securely during transport.
• When the pit is placed on the ground, make sure the ground is 

even.

Fig. 1

Lifting the pit

3.2 Inspecting the product

After transportation and before installation, the pumping station 
must be inspected by the customer.
The inspection must include the following:
• Check the pumping station for transport damage. Contact the 

transporter immediately if you detect any damage.

• Check that the products delivered correspond to the order.
• Check the positions and sizes of fittings.
• Retighten various connections, as they may have become 

loose during the transport.

• Check that all valves, except the draining valve in the valve 

chamber, are open.

• Check other equipment such as vent pipes.

When transporting and handling the pit at low 
temperatures, take into consideration that the pit 
impact resistance is reduced.

Before raising the pit into vertical position, remove 
transport supports and accessories from the inside of 
the pit.

DANGER
Crushing hazard

Death or serious personal injury
- Place the pit on even ground to prevent the pit in 

overturning.

If the pit is equipped with a lifting point, use it during 
handling.

TM

06

 0

063

 47

13

DANGER
Crushing hazard

Death or serious personal injury
- Make sure the lifting bracket or strap is tightened 

before attempting to lift the pit. Tighten if 
necessary. Carelessness during lifting or 
transportation may cause injury to persons or 
damage to the pit.

Summary of Contents for PS.R Series

























Reviews: