6. Remove the threaded pipe.
TM033910
7. Apply Loctite 243 to the threads of the set screws.
Tighten the set screws to the correct torque.
• M5: 6 ± 2 Nm
• M6: 8 ± 2 Nm
• M8: 15 ± 3 Nm
TM03391
1
8. Fit the coupling guard. Tighten the screws to the
correct torque.
• M5 x 10 mm: 6 ± 2 Nm
TM033912
4.1.2 Mounting of motor on pump housing with
feet
The pumps are supplied with a transport bracket
protecting the shaft seal during transport. When you
mount the motor, follow the instructions and drawings
as below.
1. Remove the coupling guard and loosen the set
screws in the shaft.
TM033913
16
English (GB)
Summary of Contents for NB 80-200/222VAXEF1BESBQQEWX2
Page 2: ......
