Page 2
Declaration of Conformity
We GRUNDFOS declare under our sole responsibility that the Home Booster packaged booster sets referenced in these installation
instructions to which this declaration relates are in conformity with the Council Directives on the approximation of the laws of the
EEC Member States relating to:
z
Low Voltage Directive (2006/95/EEC)
z
EMC Directive (2004/108/EC)
By Inspection from the individual componemt manufacturers:
z
BS EN 60335-1:2002
Household and similar electrical appliances, Safety Part 1: General requirements
z
BS EN 60335-2-41:2003
Household and similar electrical appliances, Safety Part 2-41: Particular requirements for
pumps.
z
BS EN 60730-1&A2:2008 Automatic electrical controls for household and similar use, Part :1General requirements
z
BS EN 1717:2000
Protection against pollution of portable water in water installations and general requirements of
devices to prevent pollution by backflow.
If further details are required please contact one of the Grundfos offices listed on the back page of these instructions.
1st January 2010
Grundfos
Manufacturing
Ferryboat Lane, Castleton
Sunderland, SR5 3JL
Mr Lee Carlin, General Manager
If further details are required, please contact one of the Grundfos offices listed on the back page of these instructions.
General Data
DELIVERY AND HANDLING
The Home Booster set is supplied from the factory mounted on a wooden pallet suitable for handling by forklift equipment.
The weight and size of the Home Booster may require the use of proprietary lifting equipment in order to be handled
safely. During installation ensure the recommended procedures for lifting pallet mounted equipment are observed.
INSPECTION
On delivery, the Home Booster should be unpacked and inspected, any damage must be reported to the supplier within seven days
in writing.
It is important that these installation and operating instructions are studied carefully before any installation takes place.
The installation and operation should also be in accordance with local regulations and accepted codes of practice.
WARRANTY
1. The Grundfos warranty covers all defects within the Home Booster originating from faulty workmanship and/or materials for a
period of two years from the date of installation or thirty months from the date of despatch from the factory, whichever is the
shorter. The warranty covers the replacement of any faulty parts and our labour cost to replace the faulty parts. It does not cover
the cost of removing, returning and refitting the booster set or any secondary losses arising from the failure.
2. Under no circumstances should faulty equipment be dismantled. Failure to comply with this instruction could invalidate the
warranty.
3. Defects arising from incorrect installation, water containing debris, or harmful chemicals, inadequate electrical protection, faulty
ancillary equipment, lightning or other circumstances beyond our control, are not covered by the warranty.
SITE STORAGE
It is strongly recommended once the Home Booster has been delivered to site, that it is placed immediately into a dust, moisture
and frost-free area which has been secured to prevent unauthorised interference.
APPLICATIONS
The Home Booster has been designed to be compact, reliable, and simple to install, and to provide many years of efficient and
reliable service. The main applications for the Grundfos Home Booster are, Domestic pressure boosting and Light Commercial
pressure boosting
Booster sets must not be used in an environment which has been classified as hazardous and could therefore cause an
explosion if there is a danger of ignition by a flame path.
Grundfos Pumps Ltd do not accept any responsibility for the use of booster sets to pump liquids which could be construed
as being hazardous to health either by touch, ingestion or inhalation of fumes or gases given off by the liquid.
MAXIMUM OPERATING CONDITIONS
Liquid temperature range:
+3
°
C to +40
°
C
Ambient temperature:
up to +40
°
C
Relative Humidity:
up to 95 % non condensing
Maximum pressures:
Home Booster 3.0:
3.6 bar
Home Booster 4.5:
5.6 bar
Inlet pressure:
6 bar
Noise level of the Home Booster:
65 dB(A)
WRAS APPROVAL
The wetted components of the Home Booster 3.0 and 4.5 models are WRAS approved for use with potable water.
