Grundfos CRN 16 A, Service Instructions Manual

Page: 5 / 12

22.10.2002
GB
Page 5 of 12
3. Service tools
The following drawings and tables show special, standard and torque tools for pump service.
3.1 Special tools
3.2 Standard tools
3.3 Torque tools
TM00
246
2 1
193
Pos. Description For pos. Suppl. information Part no.
A Shaft holder for dismantling SV0287
B Punch for removing the shaft 51 SV0286
C Shaft holder for assembly SV0040
D Puller for neck ring 45 SV0239
E
Punch for removing the pump
head cover
77 SV0252
Pos. Description For pos. Suppl. information Part no.
F Ring/open-end spanner
28.a M8 - 13 mm SV0055
28-28.a-67 M12 - 19 mm SV0054
18-28-36-36.a 24 mm SV0122
G Tee key 9
M8 - 6 mm SV0050
M10 - 8 mm SV0051
H Hexagon socket head screw key 127-134 M16 - 14 mm SV0393
Pos. Description For pos. Suppl. information Part no.
I Torque wrench H-I-J
4-20 Nm 9 x 12 SV0292
20-100 Nm 9 x 12 SV0269
40-200 Nm 14 x 18 SV0400
J Ring spanner
28.a-I M8 - 13 mm 9 x 12 SV0294
28-28.a-67-I M12 - 19 mm 9 x 12 SV0271
28-36-36.a-I M16 - 24 mm 14 x 18 SV0524
K
Socket driver for hexagon socket
head screws
9-I-L
M8 - 6 mm ½” x ½” SV0297
M10 - 8 mm ½” x ½” SV0298
127-134 M16 - 14 mm ½” x ½” SV0394
L Ratchet insert tool I-K 9 x 12 -> ½” x ½” SV0295
M Extension bar L-137-134 ½” x ½” x 10 SV0395