background image

5

1.4 Responsibilities of the operator

The owner of the building or operator of the VGB-103 is 
responsible for the following:

Consider this manual to be part of the product and ensure 
that it is kept clearly accessible in the immediate vicinity of 
the system for the entire service life of the system.

Meet the installation requirements specified by the 
manufacturer (required water connections and fittings, 
environmental conditions, electrical connection, protective 
pipe for dosing line if necessary, audible or optical warning 
device for alarm messages if necessary). 

Ensure that water lines and fixings are regularly checked, 
serviced and maintained.

Obtain official approval for storing chemicals, if necessary.

Train users in the operation of the system.

Ensure that the regulations for the prevention of accidents are 
observed in the installation location (German GUV-V D05 
regulation for the prevention of accidents, "Chlorination of 
Water" dated January 1997).

Provide all users and service personnel with protective 
clothing in accordance with GUV-V D05 (face mask, gloves, 
protective apron).

1.5 Maintenance and service personnel

The system may only be maintained and serviced by authorised 
service personnel from Grundfos Alldos.

1.6 Correct usage

The Grundfos Alldos VGB-103 may be used for dosing chlorine, 
Cl

2

, as being described in this manual.

1.7 Inappropriate usage

Applications other than those listed in section 

1.6 Correct usage

 

are considered not to be in accordance with the intended use and 
are not permitted. The manufacturer, Grundfos Alldos, accepts no 
liability for any damage resulting from incorrect use.
The system comprises state-of-the-art components and has 
undergone safety-related testing.

2. Handling chlorine

2.1 Physical and chemical data

Under normal conditions of pressure and temperature, chlorine is 
a yellowish green gas with a pungent odour. It exists as diatomic 
molecule Cl

2

.

It is not flammable, but can under certain circumstances promote 
the flammability of metals, hydrocarbons etc.

Vapour pressure curve of chlorine

Fig. 1

Vapour pressure curve of chlorine

Solubility of chlorine gas in water

Fig. 2

Solubility of chlorine gas in water

Warning

Unauthorised structural modifications to the 
system may result in serious damage to 
equipment and personal injury. 

It is forbidden to open, modify, change the 
structure of, bridge, remove, bypass or disable 
components, especially safety equipment.

Atomic weight

35,457

Molecular weight Cl

2

70,941

Density (liquid)

1,57 g/cm

3

 at -34,05 °C

Density (gaseous)

3,214 g/l at 0 °C, 1 bar

1 l liquid chlorine at 0 °C

corresponds to 457 l (0,457 m

3

gaseous chlorine

1 kg liquid chlorine at 0 °C

corresponds to 311 l (0,311 m

3

gaseous chlorine

Specific gravity

2,486 (specific gravity of air: 1)

Boiling point

- 34,05 °C (1 bar)

Melting point

- 100,98 °C

Evaporation heat

269 kJ/kg (at 0 °C)

Heat conductivity

0,527 kJ/m2h (liquid chlorine)

Degree of purity acc. to DIN 
19607

99,5 %

Threshold Limit Value (TLV) 

1,5 mg/m3 (0,5 Vol.-ppm)

TM0

4

 069

0

9

0

8

TM

04

 0

692

 09

08

0

2

4

6

8

10

12

14

16

18

20

-50 -40 -30 -20 -10

0

10

20

30

40

50

60 70

Temperature (°C)

0

20

40

60

80

10

30

50

70

90

2

4

6

8

10

12

14

0

Temperature (°C)

Summary of Contents for Alldos Vaccuperm VGB-103

























Reviews: