Start-up
17 | 28
BA
-T
D3
-A
K
0
0
1
e
n
_
0
0
5
_
B
OX
E
R_K
X
-K
DX
5.3 Setting the pressure reducer (BOXER KDX)
The factory setting for the pressure reducer is 4 bar.
You can change this value as follows:
1.
Set the desired holding pressure on the handwheel for
pressure reducer
(turn clockwise = pressure increase,
turn anticlockwise = pressure reduction).
2.
Open and close a water withdrawal point.
»
The holding pressure adjusts itself.
3.
Read off the actual holding pressure at the pressure gauge.
4.
Repeat these operations until the desired pressure is
reached.
»
The required holding pressure is set.
