Operating Instructions: LUB‐M
14
SELECT
: Change settings
ENTER
: Confirmation of all changes
If no interaction takes place for a period, the device automatically
returns to the previous display mode
4.5 Quick Check – back pressure control
For test and sample purposes the installed lubrication pump can easily be used to dispense small amounts of lubricant. For this purpose,
the available pressure between the lubrication point and pump is measured. The value displayed is the back pressure in bar.
Selection of pump body by SELECT
Display shows selected pump body (green LED)
Confirmation by ENTER
Result is shown on display
(multiple repetitions possible by ENTER)
Remark: outlets of one pump unit are dispensing
lubricant alternately
Select other pump unit or timeout:
leave the menu
