6
6. Loosen both Coupling
Nuts (2) using wrench
(size 21 mm).
7. Remove Bend Pipe (1)
along with both Coupling
Nuts (2) & Sealing Rings
(3).
8. Unscrew both Bends (4)
using wrench (size 13
mm).
9. Lightly tap Cylinder (7)
with a plastic hammer &
unscrew it .
10. Unscrew Inlet Cover
Adapter (31) using
wrench (size 25 mm).
11. Connect a caliper wrench
into the holes on inlet
Cover (29). Unscrew it
anticlockwise.
12. Unscrew both Pushers
(19) using wrench (size
25 mm) or a pneumatic
wrench with 25 mm
socket.
13. Remove both Pushers (19),
Springs (17), Pusher Nuts
(16) & Pusher Buttons
(15).
14. Using two wrenches (size
10 mm), hold Piston Rod
(49) & turn Plunger Rod
(11) anticlockwise to
disconnect it from Slider
Rod (27). Remove Plunger
(9) along with Plunger Rod
(11). Remove Piston Rod
(49) & Slider Rod (27).
Pusher Button
Plunger
Piston Rod
