16
GK2EW50120B_G Revision date: 12.06.19
XR2535
]
ALUMINUM ANGLE [
ALUMINUM ANGLE TO BE FIELD CUT TO FIT
(BASED ON ENDWALL OPTION)
ALUMINUM ANGLE [
XR2535
]
ENDWALL COLUMN BASE PLATE
ENDWALL GIRT
ENDWALL COLUMN
SIDE VIEW
ALUMINUM ANGLE DETAIL AT COLUMN BASE PLATE
- (2X) #14 X 1" TEK SCREW
NOTE:
ALUMINUM ANGLE SHALL
BE FLUSH TO THE GIRT FACE
AND FIELD CUT TO FIT.
NOTE:
INSTALL ALUMINUM
TUBE PRIOR TO ATTACHING
BOTTOM RUN OF ENDWALL
GIRTS.
NOTE:
ALUMINUM TUBE ONLY
TO BE USED WHEN ATTACHING
POLYCARBONATE PANELS TO
CONCRETE PAD.
- (1X) 3 1/4" TAPCON SCREW [
FA7165
]
(SPACE AT MAX. 12" O.C.)
NOTE:
POLYURETHANE SEALANT TO BE
USED @ BASE OF ALUMINUM TUBE
GIRT
BASE PLATE (OPTION)
COLUMN
1" X 1 1/2" ALUMINUM TUBE [
113301
]
FOR USE WITH BASE PLATE
OPTION ONLY
Aluminum Angle Installation Option—Base Plates Only (B)
PANEL
ATTACH PANEL TO OUTSIDE
OF GIRT AND ALUMINUM.
IN SOME INSTANCES, ALUMINUM
ANGLE IS REPLACED WITH 113301
ALUMINUM TUBING. SEE NEXT
PAGE.
ATTENTION:
INSTALL BOTTOM
RUN OF GIRT AFTER INSTALLING
THE ALUMINUM ANGLE.
PRE-DRILL MOUNTING HOLES IN
ALUMINUM; SPACE AT 12"-16" ON
CENTER.
APPLY SEALANT (112263) UNDER
ALUMINUM THEN SECURE TO
CONCRETE USING CONCRETE
FASTENERS INCLUDED WITH KIT.
TO PREVENT LEAKS AT THIS
CONNECTION, INSTALL PC PANEL
OVER GIRT AND ALUMINUM.
DO NOT INSTALL BEHIND
ALUMINUM.
APPLY SEALANT UNDER
AND ALONG ALUMINUM.
