11
Revision date: 12.17.14
1
Assembly Instructions
13. At the drain end of the gutter, determine how you want to end the gutter run and where you want to install the 113627 drop outlet. Consider the amount of
gutter that remains and where you want the reservoir (additional purchase required) to sit. Install the drop outlet in the desired position and seal with the
113628 cement. Install the end cap and glue in place using the 113628 cement.
14. Return to the high end of the gutter and install that end cap. Glue in place.
15. Continue by securing the roof material in the gutter.
*Actual building frame may differ from the
example shown.
Extend ribbon board past
frame to allow room for tank.
Additional purchase required.
Use the 3" pvc (not shown)
included with the kit as a
downspout if needed.
Additional purchase required for reservoir.
RAINWATER CATCH DRAIN INSTALLATION (continued)
