background image

2

.

2

 

Symbols

 

explanation

Symbol

Description

Danger of high voltage and electrical shock.

Danger of hot surface.

SPA will become hot during operation to avoid contact during

 operation.

Caution: Risk of danger.Caution: Risk of danger.

Danger of high voltage

There is residual voltage existing in SPA after turned off, please

 

wait at least 5 minutes before you open the upper lid or the 

DC lid.

Connecting the protective earth (PE) cable.

Remind operators refer to the documents supplied with SPA.

SPA should not be disposed as household waste.

Keep dry! 
The package /product must be protected from excessive
 humidity and be stored under cover.

CE Mark.
SPA complies with the requirements of the applicable CE 
guidelines.

4

3

Product

 

Introduction 

3

3.1 Function

3.2 Models

3.3 Apperance

SPA  series  are  the  AC  Coupled  inverter  which  can  store  energy  into  battery  with  or 

without  existing  grid-tied  inverter  system.  SPA  can  be  used  to  optimize  self-

consumption

stored in the battery or feed into public grid. It also can provide power for 

emergency use during the grid lost by using the energy from the battery.

This document involves the following product model:
•SPA 1000TL BL

•SPA 2000TL BL
•SPA 3000TL BL
Table3.1 Designation explanation of the SPA series.

Series name  •SPA-Single Phase AC Coupled inverter.
Power level   •1000TL-the power level is 1kW.
                      •2000TL-the power level is 2kW.

                      •3000TL-the power level is 3kW.
Battery          •BL-be used with low voltage battery.

Position

Description

A

LED of status display

B

LCD screen

C

Function button

D

Battery terminal

E

DIP switch

set safety standard

Fig 3.1

Summary of Contents for SPA 1000TL BL

































Reviews: