8
Step 4
Use a heat gun to heat the heat shrinking tube.
6.2 Connect One Battery
!
CAUTION
⁎ Ensure that battery is in off mode and battery breaker is turned off.
⁎
Ensure that no cable is twisted after battery is wired.
After making the cables ready and equipping yourself with protective devices, connect cables to the
battery in the following way:
Step 1
Use an M6 screw to fasten the grounding wire to grounding terminal and fix the other end to the
inverter directly.
Note that the cross-section of grounding wire is 16mm
2
.
Cross-head screwdriver
Step 2
Insert a network cable into battery port.
1.
Plug one end of network cable A into the
PCS
port of battery, and plug the other end into the network
port of the inverter.
2.
Insert two terminators (a crystal plug with pin 4 and pin 5 short circuited) into
Link-Out
and
Link-In
respectively.