INSTALLATION
4
4.1 Safety instructions
A
B
C
D
E
F
G
Do not remove the casing. Inverter contains no user serviceable
parts. Refer servicing to qualified service personnel. All wiring
and electrical installation should be conducted by a qualified
service personnel and must meet national requirements of AS4777
or VDE0126-1-1.
Both AC and DC voltage sources are terminated inside the PV
Inverter. Please disconnect these circuits before servicing.
When a photovoltaic panel is exposed to light, it generates a DC
voltage. When connected to this equipment, a photovoltaic panel
will charge the DC link capacitors.
Energy stored in this equipment’s DC link capacitors presents a risk
of electric shock. Even after the unit is disconnected from the grid
and photovoltaic panels, high voltages may still exist inside the
PV-Inverter. Do not remove the casing until at least 5 minutes after
disconnecting all power sources.
This unit is designed to feed power to the public power grid
(utility) only. Do not connect this unit to an AC source or
generator. Connecting Inverter to external devices could result in
serious damage to your equipment.
Carefully remove the unit from its packaging and inspect for
external damage. If you find any imperfections, please contact
your local dealer.
Although designed to meet all safety requirements, some parts
and surfaces of Inverter are still hot during operation. To reduce
the risk of injury, do not touch the heat sink at the back of the PV-
Inverter or nearby surfaces while Inverter is operating.
Item
A
B
C
D
E
F
G
H
Name
solar inverter
Mounting frame
Safety-lock screws
Mounting screws
Mounting frame screws sleeve
Monitor software(disk)
manual
Bluetooth
Quantity
1
1
2
4
4
1(Optional)
1
1(Optional)
3
Unpacking and inspection
After opening the package, please check the contents of the box.
It should contain the following:
4
5
