Grow Jubilee Bunk Bed JUB109 Series, Assembly Instructions Manual

Page: 4 / 15

Maximum height
of mattress
IMPORTANT INFORMATION
Maximum height
of mattress
04
WARNING - This bed is not suitable for children under 4 years.
WARNING - Do not place this child’s bed near heat sources, windows and other furniture.
WARNING - Do not use this child’s bed if any part is broken, torn or missing.
It is recommended that you always follow the manufacturer’s instructions to assembly this product.
The upper bunk bed is suitable for use by children over 6 years only.
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be
placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords
and should be placed either tight to the wall or have a gap of 300mm between the wall and the side
of the bed.
This bed may be dismantled for storage or transportation but checks must be made to ensure parts
are not damaged before re-assembling. Replacement parts can be obtained from Julian Bowen
Limited where available and at an additional cost.
Recommended mattress size: 90cm x 190cm (UK Single) with a depth of no more than 23cm.
It is necessary to frequently ventilate the room in order to keep the humidity low and to prevent
mould in and around the bed.
Please periodically check all the xings of the item and retighten when necessary.
This item conforms to British and European Safety Standards - BS EN 747: 2012+ A1:2015 and BS
8509:2008 + A1:2011.
The bed can be carefully dismantled for storage and transportation but the slatted base system (slats
and 2 side rails) should be left in one piece. Do not dismantle by removing the 56 x Self- Tapping
Screws (H).
IMPORTANT: THESE LABELS ARE NOT TO BE
REMOVED FOR SAFETY REASONS. REMOVING THE
LABEL MAY CAUSE 04 DAMAGE TO THE PAINT FINISH.