11
GB
CHARGER FOR ROBOT LAWNMOWER BATTERY
Introduction
To get the most out of your new charger
for a robot lawnmower battery, please read
through these instructions before use.
We also recommend that you save the
instructions in case you need to refer to them
at a later date.
Technical data
Input voltage:
28 V DC
Output voltage:
24.5 V DC
Charging current:
200 mA
Charging temperature:
0-45 °C
Storage temperature:
-20-55 °C
IP class:
IPX0
Special safety requirements
Note! The charger must be connected to the
robot lawnmower’s power supply. It must not
be connected to any other power sources!
This charger may only be used together with
suitable batteries!
Do not try to charge other batteries with the
charger.
Protect the battery’s and charger’s terminals
when they are not in use. If they come into
contact with liquids, metal parts or other
conductive materials, the charger may short
circuit.
Allow the battery to cool to the ambient
temperature before recharging it.