2
Description
Page
To The Owner, Maintenance
2
Safety Precautions, Torque Specifications & Unpacking Components
3
Assembling Lift Components & Initial System Startup
4
Lift System
5
Connecting & Disconnecting the Blade, Skid Shoe and Tilt Plate Adjustment
6
Blade Assembly & NANT Blade Assembly
7
Hydraulic Instructions, Angle System & 2-Lever Angle System Operating Instructions
8
Relief Valve Instructions
8-9
Angle / Tilt Function Abbreviation Key
10
Angle Hydraulic Components
10
No Angle - Hydraulic Tilt System & Hydraulics
11
Quick Attach System
12-13
Hydraulic Angle - Hydraulic Tilt & Hydraulic Angle - No Tilt System
14-15
Hydraulic Angle - Hydraulic Tilt & Hydraulic Angle - No Tilt Hose Routing (Blade Side)
16-17
Hydraulic Angle - 2 Lever System Hose Routing (Blade Side)
18-19
Tractor Side Hydraulic Hose Routing
20
Wire Harness
21
Hydraulic Schematic
22
2- Lever Hydraulic Schematic
23
Contact Us, Improvements, & Warranty
24
Contents
To The Owner
This manual contains information concerning the operation, adjustment, and maintenance of the Ag Pro Plus
HD blade assembly. You have purchased dependable, long lasting equipment, but only by proper care and
operation can you expect to receive the performance and long service built into our products. Please have
all operators read this manual carefully and keep the manual available for ready reference. If you have any
questions or concerns, contact Grouser Products.
Maintenance
Due to the harsh environment many of our equipment operates in, the following tasks
should be performed every 10 hours or less.
• Inspect all equipment before operation for existing or potential damages.
• Lubricate all joints with high quality grease.
• Inspect and tighten all bolts to torque specifications on page 3.
• Check replaceable cutting edge for wear ensuring there is enough material to prevent permanent damage
to the blade.
• Make sure all non-rotating pins are secured properly.
• Check hydraulic cylinders and hoses for damage or leaks. For replacement parts, see hydraulic pages for
your specific system.
• Check skid shoes for wear and replace if necessary. For adjustment, see page 6.
• Inspect all tilt-ways for aggressive wear. See page 6 for tilt plate adjustment.