Grouser Products Ag 240I, Owner'S Manual & Parts Book

Page: 3 / 24

3
Safety Precautions
A careful operator is the best operator. Most accidents can be avoided by observing certain precautions. To
help prevent accidents, read and take the following precautions before operating this equipment. In addition
to these precautions, please follow all safety and operational instructions of your tractor manufacturer.
The Dozer:
1. The 240I and 241I Dozer should be operated only by those who are responsible and instructed to do so.
2. Read the owner’s manual carefully before using this equipment. Lack of operating knowledge can lead to
accidents.
3. Keep the dozer maintained in reliable and satisfactory condition to ensure your safety.
4. Make sure the area is clear of people before moving any equipment.
'RQRWPRGLI\RUSHUPLWDQ\RQHHOVHWRPRGLI\RUDOWHUWKHHTXLSPHQWDQGLWVFRPSRQHQWVZLWKRXW¿UVW
consulting Grouser Products.
Servicing the Dozer:
1. Read and follow all safety instructions provided by the tractor manufacturer.
2. Always use proper personal safety gear when performing maintenance on equipment.
3. Before servicing, relieve hydraulic pressure, stop engine and fully engage parking brake.
(VFDSLQJK\GUDXOLFÀXLGXQGHUSUHVVXUHFDQSHQHWUDWHVNLQFDXVLQJVHULRXVLQMXU\,IÀXLGLVLQMHFWHGLQWR
skin, obtain medical attention immediately.
– DO NOT use your hand to check for leaks. Use a piece of cardboard or paper to search for leaks.
– Stop the engine and relieve pressure before connecting or disconnecting lines.
– Tighten all connections before starting the engine or pressurizing lines.
Storing the Dozer:
1. Thoroughly clean the inside and outside of the dozer before storage. Use paint where necessary to
prevent rust.
2. Check the dozer for worn or damaged parts. Install new parts as required.
3. Lubricate all pins and joints.
7RUTXH6SHFL¿FDWLRQV
$OOEROWVVKRXOGEHWLJKWHQHGWRWKHVSHFL¿FDWLRQVWKDWDUHVWDWHG,IVSHFL¿FDWLRQVDUHQRWVWDWHGIROORZWRUTXH
charts below.
Torque - Dry (ft–lbs)
SAE Grade 5 SAE Grade 8
Size UNC UNF UNC UNF
5/16 17 19 24 27
3/8 30 35 45 50
7/16 50 55 70 80
1/2 75 85 110 120
9/16 110 120 150 170
5/8 150 170 210 240
3/4 260 300 380 420
7/8 430 470 600 670
1 640 720 910 1020
Torque - Dry (ft-lbs)
Size Grade 10.9
M18 x 2.50 284
M20 x 2.50 401
M22 x 2.50 547
M24 x 3.00 694