39
1. This TEST should be used for Factory test /Service test. Do not use this DIAGNOSTIC TEST other than specified.
2. Activating the heater manually with the door open may trip the thermostat attached to the heater, therefore do
not activate it manually. (Do not press the door switch to operate the heater while the door is open).
This program has been added for testing the dryer and detecting errors.
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use .
Note
Number of times the START
button is pressed
Display
Checking point
Diagnostic test: (display)
11
Pressing the START button cycles to the next test function.
Data Name
Machine
Entering
the test mode
COIN
OPL/Coin Type
Button
Display
Description
Entering the test mode
Turn on/off toggle switch.
1. Entering programming mode
2. WHITES & COLORS
3. START
1. Entering programming mode.
2. WHITES & COLORS
3. START
Enter the dlagnostic test mode.
Push and hold the WHITES & COLORS and DELICATES at the same time.
After that push PERM. PRESS button for 3 times. Push START button.
Press the WHITES & COLORS button.
Then appears in the display.
Enter the diagnostic test mode.
Press the WHITES & COLORS button.
Then appears in the display.
None
2 time
3 time
4 time
5 time
6 time
Druing check, If the door is open.
Druing check, If the door is closed.
1 time
Check the version and code of machine.
ELECTRIC TYPE : P3 OE
ELECTRIC TYPE: Heater runs.
Motor + Heater 1 (2700W)
Door switch
(Motor & Heater Off, Buzzer beeps seven
times)
Motor runs.
LqC 1
Version and code of machine (All LED on)
Display P3:OE and gU:XX
alternately. XX is the version number.
Measured moisture value (70~239)
Current temperature (5~70)
(Displays the temperature inside the drum in
Celsius.)
Current temperature (5~70)
(Displays the temperature inside the drum in
Celsius.)
Version and code of machine
LqC 1
dE
(The door is open. Please close the door
completely)
Measured moisture value (70~239)
ELECTRIC TYPE: Heater runs.
Motor + Heater 1 +Heater 2 (5400W)
LED & KEY CHECK
Press WHITES & COLORS button.
Press PERM.PRESS button.
Press DELICATES button.
Test ends.
Test goes back at step 2.
(Motor on & Heater Off)
12
DIAGNOSTIC TEST
www.groupdynamics-laundry.com
