Generator
Section
12
Generator running instructions – important information
for the operation of LED lights & heating system
The generator charges the 12V battery, allowing the LED lighting and diesel powered heating system and
inverter powered electrical sockets to be operational without the need for the generator to be running.
ON /
OFF
Heating
system
LED
lights
Generator needed
for the operation of microwave, kettle and hot water system
ON
/ OFF
To power the
microwave,
kettle and hot
water system, the
generator needs to
be running.
The hot water boiler will take roughly
15 minutes
to reach temperature and will
remain warm for approximately
2-3 hours
.
15 mins
to heat up
Retains heat for
approx.
2/3 hours
Microwave
Kettle
Hot water system*
Battery charger
Groundhog recommends that the
generator is left to run for its
full cycle
(approximately 3 hours)
at least twice a week,
depending
on use.
This will ensure the
on-board batteries are kept
charged and in good condition.
NOTE:
If the unit is used with additional 12V appliance, the generator may need to be run for longer periods.
* The generator is needed to heat the water. When it reaches its temperature then the generator does not need to run.
Run generator
for
full cycle
at least
twice
a week
NOTE
When leaving
the generator
run, it will
automatically
shut off and
reset.
Inverter powered
socket c/w USB
User’s Guide
|
Mobile GP360 & GP500 Fusion Pulse Units
www.groundhog.co.uk
|
23
