GroundEFX Stryker Lite MX300 User Manual Download

Page: 15 / 16

TROUBLESHOOTING

PROBLEM

SOLUTION

Won’t turn ON,

there is no sound

Check to ensure that you are using

new batteries.
Check to see if the batteries were

placed in the correct positions.
Check the connection of the wire

from the rod to the handle unit.

Abnormal/erratic

Sounds

Outdoor use only.
Stay away from power lines, benches,

wire fences and other metal detectors

that can cause false readings.
Reduce the sensitivity level.

Abnormal/erratic

Sounds

Check that the Mode you wanted is

selected.
The All-metals mode allows you to

search for all metals so you will not

miss the one you are looking for.

TONE RECOGNITION

There are eight tones indicatng 8 different metals (iron, foil, nickel, P-Tab,

S-Cap, Zinc, Dime and Quarter)that will help you to identify the material

the detector has found

Summary of Contents for Stryker Lite MX300

















Search results

Summary of Contents for Stryker Lite MX300

Reviews:

Related manuals for Stryker Lite MX300

Brands by name

Popular brands

GroundEFX Stryker Lite MX300, User Manual

Search results

Summary of Contents for Stryker Lite MX300

Reviews:

Related manuals for Stryker Lite MX300

Brands by name

Popular brands