2
Nuclear amplifiers
Due to their state- of- the- art technology and high efficiency, these Class-D mono amplifiers help your system to provide an impressive sound
experience.
The digital circuit technology of the power supply and the signal processing allows achieving maximum performance levels from the provided power.
Due to the different filters and circuits a very high power output is achieved, therefore these amplifiers are made for low frequency information
(Subwoofer). They can not be used for high- and midrange speakers.
The link mode enables to use to full power of two amplifiers for one speaker. This is first of all advantageous for a really powerful and lively music
playback.
Tools and materials you need
Screwdriver
Electric drill, 3 mm / 0.12” carbide drill bit
Mounting screws
Power wire min. 35 mm² / 2 AWG
Ground wire min. 35 mm² / 2 AWG
Speaker wire min. 2 x 4 mm² / 11 AWG
Please note!
As a precaution it is advisable to disconnect the vehicle’s battery before making connection
to the +12 Volts supply wiring (see owner’s manual of your car for further information).
Please use great caution drilling your trunk. Your gas tank and brake lines can be damaged by puncturing with your drill bit – this could
cause damage or failure of your cars operating systems.
Never pass wires over sharp angles. It is recommended to buffer the power supply of the amplifier with an additional battery to
guarantee a stable operation voltage.
WARNING !
High powered audio systems in a vehicle are capable of generating "Live Concert" levels of sound pressure. Continued exposure to excessively high
volume sound levels may cause hearing loss or damage. Also, operation of a motor vehicle while listening to audio equipment at high volume levels may
impair your ability to hear
external sounds such as; horns, warning signals, or emergency vehicles, thus constituting to a potential traffic
hazard. In the interest of safety, Consumer Electronics recommends listening at lower volume levels while driving.
Summary of Contents for GZNA 1.2550DXII
