8
GROUND ZERO
Setting
Long press SEL button to enter into main settings menu,
Rotate Vol knob on front panel or press Vol+/- buttons on remote control to choose the volume level 0-
45.
Press SEL button repeatedly to choose between sub-settings: Rotate Vol knob on front panel or press
Vol+/- buttons on remote control to adjust the settings.
AF => IN VOL. => ADJ CLOCK => 24/12hour =>TA VOL => EON => PTY => REG =>
MONO (In radio mode only) => LOUD => SUBW => BEEP => DSP => EXIT
AF
Set AF (Alternative Frequency) on/off.
IN VOL
Adjust the initial volume level 0-45.
ADJ
Rotate the Vol knob clockwise or press VOL+ button on remote control to
adjust minute and rotate the Vol knob anti-clockwise or press
VOL- button on remote control to adjust hour.
24 / 12 hour
Turn the knob to choose 24 or 12 hour
TA VOL
Turn the knob to adjust TA volume.
EON
Turn the knob to adjust EON ON/OFF.
PTY
Set (Program Type) on /off.
REG
Choose REG on/off. When REG is enabled (on), the receiver accepts regional
variants of the tuned station with REG icon turned on. When REG is disabled
(off), the receiver ignores regional variants.
LOC
Adjust LOC ON/OFF, when LOC is enabled, the receiver accepts regional
variants.
MONO
Turn the knob to choose MONO ON/OFF.
LOUD
Set Loudness ON/OFF. Default setting is OFF. The “LOUD” function makes it
possible to emphasize low and high frequencies through the push of a
button in order to increase sound perception in an adjustment to the
respective volume.
SUBW
Set SUBW ON/OFF. This function allows you to turn the RCA subwoofer
output ON and OFF.
BEEP
Set BEEP ON/OFF. When BEEP is on, press any key will make a beep sound.
Default setting is OFF.
DSP
Choose between POP => ROCK => CLASS => FLAT => NONE.
Mode Setting
Press MODE button TUNER => (* CD) => (* SD) => (*USB) => AUX => TUNER
(* available only if there is media device in disc, SD, USB slot)
Display
Press DIS button on remote control to see current tuning information and time.
In Radio mode, display menu:
Clock (clock time) => PTY => PS (program station) => Frequency => EXIT
9
GROUND ZERO
AUX jack
Intended to receive audio signals by connecting to external media player.
Digital Tuner Operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
RDS overview
Band selection
Press MODE button to select TUNER. Press BAND to select:
FM1 => FM2 => FM3 => AM1 => AM2.
When a new frequency band is selected, the last chosen frequency / station of that frequency band will
be heard.
Manual / automatic tuning
Manual tuning: To find a station, select a band first, then press and hold T-DN/T-UP buttons on remote
control until MANUAL appears on the display, then press these buttons repeatedly to search a station
upward or downward.
Automatic tuning: To find a station, select a band first, then press and hold T-DN/T-UP buttons on front
panel or short press T-UP/DN buttons on remote control, the automatic downward/upward search will
start. It will play when a station is found.
PI
Program Identification code
Code for identifying programs
PS
Program services name
Broadcast station name data expressed in
alphanumerically characters.
AF
Alternative Frequency
Frequency list of broadcasting stations transmitting
the same program.
TP
Traffic program identification
Identification data for traffic information
broadcasting station.
TA
Traffic announcement identification
Identification data showing traffic information is
being transmitted or not.
EON
Enhanced other networks
information
The “EON” function is an additional RDS service. If
the current program doesn’t offer any traffic
announcements, EON automatically switches to the
traffic announcements on another program. After
the end of the announcement, the device switches
back to the previously heard station. The readiness
for traffic announcements “TA” has to be activated
for this. To turn the EON function on or off, please
switch to the RDS menu.
