GZ BASS KIT 12.300X
Amplifier specifications
Model
GZBA 1.300X
Type
Mono class A/B amplifier
Power output @ 4 ohms (14.6V) / RMS
1 x 200 W
Power output @ 4 ohms (14.6V) / max
1 x 300 W
Low pass filter
40 – 250 Hz
Bass Boost
0 – 6 dB (@ 40 Hz)
Frequency response
15 Hz – 20 kHz
Input sensitivity
200 mV – 6.5 V
Auto-On @ High-level input
Fuse
1 x 30A
Dimensions / heatsink only
W x H x L (mm/inch)
180 x 53 x 236 / 7.09” x 2.09” x 9.29”
Subwoofer specifications
Model
GZ BASS KIT 12.300X subwoofer
Type
30 cm / 12” vented subwoofer (with Aero port)
Power handling
300 W
Impedance
4 ohms
Volume (net)
40 Liter / 1.41 cu.ft.
Dimensions
W x H x D at top/bottom (mm/inch)
520 x 360 x 250 / 350 mm
20.47“ x 14.17“ x 9.84 / 13.78“
Trouble shooting guide
Symptoms
Inspect
Check
No sound
Is the POWER LED illuminated?
Check the fuses of the amplifier
Make sure that remote lead is connected
Check the +12 Volt connection
Check the ground connection
Is the diagnostic LED illuminated?
Check for speaker short or overheating
Amp not switching on
Power and ground wiring
Check the power and ground wiring
Remote wire
Check the connection of the head unit
Amplifier switches off
at medium or high levels
Check speaker load impedance
Make sure that the recommended speaker
load impedance is observed
Protection LED is on
Temperature shut down
Turn the head unit´s level down
Switch the head unit off
Check the installation
Speaker wires short
Separate and insulate the speaker wires
