MCD-4801 User Manual
Ground Control
6
LAN PORT
– Two RJ-45 ports for Ethernet connection are available on
the front panel. Both are sealed with a quick-disconnect water-tight
cap. Special quick-disconnect Ethernet cable ends that maintain a
watertight connection to the MCD-4801 are available as an accessory
item.
Light Sensor
– This sensor will backlight the display in darkness so the display
can be read. From the MCD-4801 control panel, the sensitivity of this sensor
can be set, including always off.
Display
– Shows power up status and battery level.
Charge / Power Port
– This charge port is used to connect the
AC/DC Power Supply. The charger will power the terminal as well as
recharge and maintain the MCD-4801 battery. The charge system
will work as necessary with the unit on or off. Higher outside air
temperatures may increase charge time if the unit is on while
charging. Always install the Charge Port Cap when the power
supply is not connected to maintain its weatherproof integrity.
One button operation,
Global connectivity,
High-speed Internet,
No training or certification required,
A Global, Portable WiFi Hotspot.
