15
Note:
The wireless doorbell automatically
returns to the normal state, if no button has
been pressed for 7 seconds.
Repeat the procedures to set the melody for
further coupled wireless bell-buttons.
Note:
You can switch between the external
and internal melody memory at any time by
pressing the Select button again for about
three seconds.
The LED light ring lights up according to the
selection
• green
for active
internal memory
• yellow
for active
microSD card
.
The LED light ring
lights up yellow
when the
external melody memory
is activated.
9
9
LIGHTS UP YELLOW
You will hear
“Setting finished”
as confirmation.
11
11
SETTING FINISHED
For a selection in
external melody memory
press
the
Select button
repeatedly until the the desired
melody is played.
From now on, you hear the last played melody
when the wireless bell button is pressed.
x-
tim
es
10
10
Melody selection – melody memory / microSD-card
