Grossenbacher Systeme 50 81 379, Device Description

Page: 18 / 55

E thernet P anel
Hardware EthernetPanel
18 DVS 60646 V1.0 © 2010 by Grossenbacher Systeme AG
5.7 C
ONNECTING THE
E
THERNET
The Ethernet-Interface is compatible with standard IEEE 802.3
(10/100/1000BASE-T).
The network connection is implemented via a Cat 5e cable with shield and
RJ45 connectors. The maximum cable length and transfer speed is limited
by the cable quality in EIA/TIA 568 TSB-36. Cable lengths up to 100m are
possible.
Two diagnosis LEDs are available:
Orange:
LINK (connection to HUB or to another device)
Green: ACT (sending or receiving)
Cables connected to the Ethernet must be laid separately from the low-
voltage cables.
To ensure disturbance-free operation, it is strongly
recommended to use network cables with shield.
Connector assignment
RJ45
connector
Pin No. Signal Description
1 TXD+
2 TXD-
3 RXD+
4 -
5 -
6 RXD-
Socket, 8pole 7 -
RJ45 8 -
5.8 C
ONNECTING THE
USB-I
NTERFACE
The USB Interface is compatible to USB-standard Version 2.0
The use of the USB-Interface requires support by the operating system.
Cables connected to the USB must be laid separately from the low-voltage
cables.
ACT
LINK
3
1
2
3
4
5
6
7
8
DVS 60646-V1.0