background image

13

VELO-8 REFERENCE MANUAL

Groove Tubes Microphone Family

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

GT30
3/4”x 6 microns
Class A FET
Cardioid (omni & supercardioid optional)
Top
Excellent on stringed instruments , over-
head cymbals and vocalists who already
have a deep voice . Great for close-miking
anything without proximity effect.Good
results for most other applications .

Model:
Diaphragm:
Electronics:

Patterns:
Address:
Applications:

GT40
3/4”x 6 microns
Class A Tube
Cardioid (omni & supercardioid optional)
Top
The ultimate acoustic guitar mic .
Exceptional on stringed instruments ,
overhead cymbals and vocalists who
already have a deep voice . Excellent for
close-miking anything without proximity
effect. Very good results for most other
applications.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

GT Hardtop
3/4”x 6 microns
FET
Hypercardioid
Top
An affordable, high-quality stage vocal
mic with permanently attached ball 
windscreen.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

GT Convertible
3/4”x 6 microns
FET
Hypercardioid
Top
Winner of the 2006 TEC Award for best
sound reinforcement microphone, the
Convertible is a true condenser that
switches between a vocal or instrument
mic with a removeable ball windscreen.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

GT50
1.1”x 3 microns with Disk Resonator
Class A FET
Cardioid 
Top
A classic fixed-position cardioid mic , with
warm Class A FET electronics. Good for
male and vocals, choirs, pianos, ochestral
micing and other applications.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

GT60
1.1”x 3 microns with Disk Resonator
Class A Tube
Cardioid 
Top
All sources will benefit from its tube
warmth and character.use it for lead
and backing vocals, guitars, strings, and
anything else that benefits from a tube
mic with a set Cardioid pattern.

Model:
Diaphragm:
Electronics:

Patterns:
Address:
Applications:

GT57

1.1”x 3 microns with Disk Resonator

Class A FET
Cardioid,omni,figure 8
Side
Excellent on vocals and grand piano. A
good all-around instrument mic .
Excellent sensitivity and pattern flexibili-
ty for duets, stereo and ensemble
recording.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

GT67
1.1”x 3 microns with Disk Resonator
Class A Tube
Cardioid,omni,figure 8,super-cardioid
Side
Exceptional on vocals and grand
piano.A great all-around instrument
mic. Excellent sensitivity and patter n
flexibility for duets, stereo and ensem-
ble recording.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

Model 1B-FET
1.1”x 3 microns
Class A FET
Cardioid
Side
Excellent on vocals. A great all-around
instrument mic.

Model:
Diaphragm:
Electronics:
Patterns:
Address:
Applications:

Model 1B
1.1”x 3 microns
Class A Tube
Cardioid
Side
Exceptional on vocals. A great all-around
instrument mic.

Summary of Contents for VELO-8

















Reviews: