![background image](http://html.mh-extra.com/html/grone-0/ghdv-3295-7-stdg/ghdv-3295-7-stdg_operating-instructions-manual_2269696018.webp)
18
To set the work mode:
1.
Pull the machine plug from the mains
2.
Set the required work mode using the knob (3)
Adjusting the Drilling Depth
This power tool has a drilling depth gauge (5) which is a rod mounted on the auxiliary handle (2). The
gauge can be moved back and forth to adjust the maximum depth of the bit progressing into the wor-
kpiece. To adjust the drilling depth:
1.
Loosen the depth gauge clamp (4) or set the fl ap to the open position (4)
2.
Move the depth gauge (5) back or forth to the desired length
3.
Tighten the depth gauge clamp (4) or set the fl ap to the locked position.
Adjusting the Auxiliary Handle
The power tool is equipped with an adjustable auxiliary handle (2) that can be fi tted in any position
around the stop fl ange of the tool. Follow these steps to do it:
1.
Hold the handle and try to loosen it
2.
The handle should start rotating loosening it fi tting to the stop fl ange
3.
Set the handle in the desired position
4.
Tighten the handle fi rmly to secure it in the selected position.
Adjusting the Rotation and Changing the Rotation
Direction of the Accessory Tool
You may adjust the spindle rotation per minute level and change the rotation direction of the accessory
tool in this power tool (
only GHMV 2695-3
). To adjust the rotation level, set the desired speed using
the speed control knob (10). To change the rotation direction, turn the lever (7) to the left or right from
the machine axis.
Mlotowiertarki_Full_v04_HR.indd 18
Mlotowiertarki_Full_v04_HR.indd 18
2016-10-19 01:42:48
2016-10-19 01:42:48