![background image](http://html1.mh-extra.com/html/grone-0/2504-231150/2504-231150_user-manual_2269669016.webp)
16
can be blocked and cause its fall or recoil. Recoil is the result of improper use or misuse of the
power tool. It can be avoided by following the described below safety measures.
Hold the power tool fi rmly and keep the body and hands in a position allowing for sof-
tening of recoil. If the standard kit includes side handle, always use it to have maximum
control over recoil or torque during start-up.
The operator can control the jerks and recoil
by following safety measures.
Keep your hands away from rotating work tools. Working tool can hurt your hand during the
recoil.
Keep away from the range of motion of power tool during a recoil
. As a result of the recoil,
the tool moves in the opposite direction to the grinding wheel at the point of jamming.
Wear eye protection!
During the drilling work you can come across network elements: electrical, hydraulic or gas,
which are located in the walls. This may pose a particular danger to life or health.
Before starting
work, examine the work area, e.g. by using a metal detector.
Smaller elements or objects should be secured before work so that they do not move and cannot cause
jamming of working tool or injuries to the operator’s body.
The device is not suitable for use for threading, stirring nor screwing.
NOISE AND VIBRATION NOTICE:
The measured values of noise were established according to EN 60745 standard. The level of noise
generated by the can exceed the A-weighted sound pressure levels of 82 dB(A).
Wear ear protection!
Pay attention to ear protection especially while working in hammer mode!
Unit
2504-231150
GID
V 1100 RL
2504-240720
GID
V 720 RL
Vibrations emission value ah
m/s
2
>10
>10
Measurement uncertainty K
m/s
2
1,5
The vibration level specifi ed in this manual was measured according to the measurement procedure
specifi ed by the EN 60745 standard and can be used to compare power tools. It can also be used for
the preliminary assessment of exposure to vibration. The level of vibration is representative of the main
applications of the tool. If the power tool is used for other purposes or with other work tools and is
not suffi
ciently maintained, vibration level may diff er. The above causes may increase vibration expo-
sure during the entire work time. To accurately assess the exposure to vibrations, you should take into
Wiertarki_udarowe_Full_v03B_HR.indd 16
Wiertarki_udarowe_Full_v03B_HR.indd 16
2016-10-26 00:24:36
2016-10-26 00:24:36