38
Things you should know
Flushing the Toilet in the Case of Power Outage or Water Failure
Manual flushing if a power outage has occurred
If a power outage has occurred, the toilet cannot be flushed by the remote control. Flush the toilet by following procedures
below.
1. Detach the top cover.
2. Press the trip lever (red) for about 5 seconds.
Water runs from around the bowl to wash and push filth to the bottom of the bowl.
3. Pull the trip lever (red) for about 5 seconds after pushing filth to the bottom of the bowl.
Water runs from the bottom of the bowl to dispose of filth.
4. Press the trip lever (red) for about 5 seconds again after disposing of filth completely.
Water runs from around the bowl to store water in the bowl.
Release your hand from the trip lever after storing water in the bowl. The trip lever returns to the original position, and
the water stops running.
Top cover
Trip lever (red)
Inside the bowl
Inside the bowl
Inside the bowl