background image

19

Guarantee

Guarantee declaration
Our products correspond to the valid tech-
nical and water supply standards as well as 
the relevant approvals requirements. We 
guarantee them to be free of design and 
production faults at the time of delivery and 
that with correct use and care in accordance 
with our printed instructions they will function 
reliably.

Guarantee period 
- The guarantee is valid in private homes for 

5 years from the purchase date. Proof of 
purchase has to be provided when making 
a guarantee claim.

-  By use in commercial or institutional appli-

cations the guarantee is valid for 1 year 
after first use. An extension of the 
guarantee up to 5 years can be achieved 
by showing that the product is 
professionally maintained each year.

To make a guarantee claim, proof of pur-
chase or, the beginning of use is required. 
The guarantee period is not renewed or in-
creased through supply of spare parts or 
repair during the guarantee period. The 
guarantee period for purchased spare parts 
is the same as for original products. 

Guarantee performance
A)During the whole guarantee period we will 

correct all functional defects for which we 
are responsible (limitations see E + F).

B)It is our option if we correct the defects by 

repair or replacement.

C)During the above guarantee period we will 

not charge for the cost of parts, travel, 
working time, freight and packaging 
needed to effect the correction of defects.

D)If we are not able to correct the defect we 

are prepared to supply a replacement 
product.

E)Deliberate or careless damage is not co-

vered by this guarantee. If the installation, 
assembly or care instructions that were 
valid at the time of installation are not fol-
lowed or the product is used for a purpose 
other than that given in the written infor-
mation the guarantee declaration does not 
apply. Problems caused by dirt, lime-scale 
or aggressive cleaners are not covered by 
the guarantee.

F)The guarantee becomes void if repairs are 

not carried out competently or spare parts 
of non GROHE origin are used.

G)Replaced parts become the property of 

GROHE and are to be surrendered to our 
service personnel or sent to our registered 
offices.

Please enter date of purchase and installation here.

Our address

GROHE Limited
1, River Road 
Barking, 
Essex, IG11 OHD
GB
Tel.: 01 81 / 5 94 72 92
Fax: 01 81 / 5 94 88 98

 © 1999 Friedrich Grohe AG

                       Friedrich Grohe Aktiengesellschaft · Hauptstraße 137 · 58675 Hemer
                              Tel. 0 23 72 / 93-0 · Telex 827433 · Fax: 0 23 72 / 93 13 22

950632.book : garant_uk.fm  Seite 19  Mittwoch, Oktober 4, 2000  7:42 AM

Summary of Contents for 35 235
















Reviews: